 |
|
|
|
|
|
|
|
|
| | | | | | |
| Rated speed | Xerox Nuvera 288MX:- 288 ipm (duplex 8.5" x 11"/A4)
- 144 ipm (duplex 11" x 17"/A3)
Xerox Nuvera 200MX:- 200 ipm (duplex 8.5" x 11"/A4)
- 120 ipm (duplex 11" x 17"/A3)
| | Resolution | Print: 4800 x 600 dpi
RIP: 1200 x 1200 dpi | | Recommended average monthly volume | Xerox Nuvera 288MX: 3,000,000 images per monthXerox Nuvera 200MX: 2,400,000 images per month | | Duty cycle | Xerox Nuvera 288MX: up to 7,800,000 images per monthXerox Nuvera 200MX: up to 6,000,000 images per month | | Line Screens | 85, 106, 125, 134, or 156 lpi |
^ BACK TO TOP | Standard Capabilities | Production MICR printing | | Printed Sides | Duplex | | MICR | Yes |
^ BACK TO TOP | PDLs | TIFF/PCL 5e & PCL6/ASCII-standard Adobe PDF; Adobe PostScript Level 3; Multi-page TIFF; PPML; LCDS/Metacode; IPDS | | Network Interfaces | Ethernet interface (10/100BaseT; 1 GB) S/370 or S/380 Bus and Tag (optional) | | User Interface | 19" colour flat panel monitor (attached), USB keyboard, USB mouse | | CPU | 3.0 GHz Dual Core Processor (optional second dual core processor with additional 4 GB memory) | | Memory | 4 GB (optional second dual core processor with additional 4 GB memory) | | Hard Disk | 160 GB SATA
Second Hard Drive: 1 TB SATA (optional) |
^ BACK TO TOP | Paper sources | up to 3 feed modules (2 or 4 paper trays per module), plus an optional post-print insertion module | | Standard paper capacity | 3,200 or 5,800 sheets per module - Standard sheet feed module (4-tray): 5,800 sheets
- Oversized high capacity sheet feed module (2-tray): 3,200 sheets
| | Media Dimensions - Minimum | 5.5 x 8 inches | | Media Dimensions - Maximum | 12.6 x 19.33 inches | | Media Weight - Minimum | Coated: 90 gsm
Uncoated: 56 gsm | | Media Weight - Maximum | Coated: 140 gsm
Uncoated: 250 gsm | | Media Types | Coated: gloss, silk, matte
Uncoated: book, text, bond, cover, bristol, index offset
Specialty: tabs, envelopes, carbonless, preprinted offset forms |
^ BACK TO TOP | High Capacity Feeder | Standard Four-tray Sheet-feed Module: 5,800 sheets
Oversized High-Capacity Sheet Feed Module: 3,200 sheets, up to 12.5" x 19.3" | | Other Input Devices | Post-print Four-tray Paper Insertion Module: 5,800 sheets
Post-print Oversized Two-tray Paper Insertion Module: 3,200 sheets |
^ BACK TO TOP | Finisher | Basic Finisher Module: 3,000 sheet stacker, offset between sets or jobs. 1 or 2 staples, up to 70 sheets. Basic Finisher Module Plus: Used in addition to Basic Finisher Module, stacks up to 3,000 additional sheets, 1 or 2 staples, up to 100 sheets Basic Finisher Module-DC (Direct Connect): Provides DFA (Document Finishing Architecture) to enable direct connection to several center-registered in-line finishing devices such as the Xerox Tape Binder, C.P. Bourg (Watkiss) PowerSquare™ 200, and CEM DocuConverter™ | | Tape Bound | Xerox Nuvera Tape Binder | | Slitter/Merger | CEM DocuConverter™ | | Stacker | Xerox DS3500 Stacker |
^ BACK TO TOP | Digital Front Ends | Xerox FreeFlow™ Print Server |
^ BACK TO TOP | Electrical Requirements | Dual 187-240 VAC (nominal), 50 Amp, 50/60 Hz
DS3500 and DFA Finishers require additional line service and power
Optional modules require standard 100-240 VAC, 50/60 Hz line service | | Dimensions | Print Engine: W: 88"; D: 29"; H: 61.6"
Sheet Feed & Insertion Module: W: 31.7"; D: 28"; H: 44.6"
Sheet Enhancement Module: W: 15"; D: 28"; H: 41.5"
Basic Finisher Module: W: 33"; D: 28"; H: 44.6"
Basic Finisher Module Plus and Basic Finisher Module-DC: W: 49"; D: 28"; H: 44.6"
Xerox DS3500 Stacker: W: 35"; D: 28"; H: 44.75"
Xerox Tape Binder: W: 34.1"; D: 28"; H: 42.4" |
^ BACK TO TOP | |
