Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Duplo DMSF-10 Entry Production Dual Mode Sheet Feeder

Combines the benefits of an inline finishing device with the convenience and cost effectiveness of offline finishing
1 800 275 9376
Hours: M-Th, 8:00 a.m. - 6:00 p.m. ET

Overview

The Duplo DMSF-10 Entry Production Dual Mode Sheet Feeder is a unique Duplo/Xerox offering that combines the benefits of an inline finishing device with the convenience and cost effectiveness of offline finishing. With the inline DMSF-10, customers can share inline finishing with other printers.

The DMSF-10 operates in the following three modes:

  • Inline: Physically connected to the paper path. Transports sheets generated from the Xerox® press to a downstream device through the DMSF bypass.
  • Offline – Attached: Physically connected to the paper path. Uses the High Pile Bottom Tray (Tray B) and Top Tray (Tray A) to feed sheets to a downstream device.
  • Offline – Unattached: Physically disconnected from the paper path. Uses the High Pile Bottom Tray (Tray B) and Top Tray (Tray A) to feed to feed sheets to a downstream device.

Key Features

  • All the benefits of the offline Xerox® Dual-Mode Sheet Feeder solution plus the advantages of inline finishing
  • Increases productivity – use inline or offline based on your schedule and leverage both assets simultaneously at full-rated speed
  • Maximizes load balancing between printers
  • Load while run in bypass mode
  • Eliminates the inline versus offline finishing dilemma. You can have both!

Your Challenges

Utilization of assets and operational efficiency are always a challenge.

Key Challenges

  • Inefficient use of load balancing between printers and finishing
  • Other printers cannot use downstream finishing if the device connected to a printer
  • Finisher is dependent on the press it is connected to: if the printer is in maintenance or not running jobs to that finishing device, the device is idle

How Xerox Can Help

  • The Duplo DMSF-10 Entry Production Dual Mode Sheet Feeder provides a method for bringing other press output to the finishing device, increasing operation productivity
  • The finishing device is not dependent on a connected press to run as the DMSF-10 provides a means of delivering jobs

Resources